The Yoke for CP 214 Style Rivet Squeezers is a high-quality aircraft tool designed for precision riveting tasks. These appear to have little use though they do have surface rust from storage. Back is about 3/4″ wide. Unbranded but came from working USA aircraft manufacturing facility (these people don’t buy junk). Slight surface rust present but nothing that will stop it from working.
The Yoke for CP 214 Style Rivet Squeezers is a high-quality aircraft tool designed for precision riveting tasks. These were pulled off of cp214 riveters. Only slight or even no use on these yokes. Some have the number ts17-885H 5315-0031 stamped into them. Unbranded but came from working USA aircraft manufacturing facility (these people don’t buy junk). Slight surface rust present but nothing that will stop it from working.
The Yoke for CP 214 Style Rivet Squeezers is a high-quality aircraft tool designed for precision riveting tasks. Unbranded but came from working USA aircraft manufacturing facility (these people don’t buy junk). Slight surface rust present but nothing that will stop it from working.
The gun’s compact size and sturdy construction make it a durable and convenient tool for professionals and DIY enthusiasts alike.
RAT640 Basic Truck Cab Kit (accepts Huck® Gun noses) This aggressively priced tool installs up to 1/4″ Magna-grip® lockbolts and is capable of installing all lockbolt and blind fasteners used in truck cab bodywork. It is compatible with Huck® 202, 210, 212, 244, 2025, 229, 230, Gage Bilt 722, 730, 731 and uses the same 3/4″ diameter noses. This kit includes a 3/16″ Magna-Grip® nose used to install cab body panels. This robust tool features extruded aluminum pneumatic and hydraulic body sections. The pulling piston is made from chrom-moly steel hardened to Rockwell C30. Thought manufactured in China, critical seals are sourced from Europe. This tool is suitable for owner operators and small repair shops. Pneudraulic Riveter, 0.55 Inch (14 mm) Stroke, Pull Capacity: 7,800lb. at 100 psi (35kN at 7 bar), Air Pressure 70-100 psi (5-7 bar), Power Source: 70-100 psi Shop Air, Hydraulic Fluid: Automatic Transmission Fluid meeting DEXRON® III, DEXRON VI, MERCON®, Allison C-4 or equivalent, 32 to 125 Deg F (0 to 51.7 Deg C) Operating Temperature, Cylinder Diameter: 4.9 Inch (110.62mm), Overall Height: 13.7 Inch (350mm), Length of Head: 8.7 Inch (220mm), Center to Edge: 0.865 Inch (22), Fastener Type: 3/16 Inch, 1/4 Inch, Weight 4lb. (1.8kg) Compare to Gage Bilt 722 and Huck® 2025. HUCK®, MAGNA-GRIP®, MAGNA-LOK®, BOM® AND C6L® ARE REGISTERED TRADEMARKS OF ALCOA INC. KENWORTH® AND PETERBILT® ARE REGISTERED TRADEMARKS OF PACCAR INC. FREIGHTLINER® IS A REGISTERED TRADEMARK OF DAIMLER TRUCKS NORTH AMERICA, LLC. MACK® IS A REGISTERED TRADEMARK OF MACK TRUCKS, INC This aggressively priced tool installs up to 1/4″ Magna-grip® lockbolts and is capable of installing all lockbolt and blind fasteners uséd in truck cab bodywork. It is compatible with Huck® 202, 210, 212, 244, 2025, 229, 230, Gage Bilt 722, 730, 731 and uses the same 3/4″ diameter noses. This kit includes a 3/16″ Magna-Grip® nose uséd to install cab body panels. This robust tool features extruded aluminum pneumatic and hydraulic body sections. The pulling piston is made from chrom-moly steel hardened to Rockwell C30. Thought manufactured in China, critical seals are sourced from Europe. This tool is suitable for owner operators and small repair shops. Pneudraulic Riveter, 0.55 Inch (14 mm) Stroke, Pull Capacity: 7,800lb. at 100 psi (35kN at 7 bar), Air Pressure 70-100 psi (5-7 bar), Power Source: 70-100 psi Shop Air, Hydraulic Fluid: Automatic Transmission Fluid meeting DEXRON® III, DEXRON VI, MERCON®, Allison C-4 or equivalent, 32 to 125 Deg F (0 to 51.7 Deg C) Operating Temperature, Cylinder Diameter: 4.9 Inch (110.62mm), Overall Height: 13.7 Inch (350mm), Length of Head: 8.7 Inch (220mm), Center to Edge: 0.865 Inch (22), Fastener Type: 3/16 Inch, 1/4 Inch, Weight 4lb. (1.8kg) Compare to Gage Bilt 722 and Huck® 2025. HUCK®, MAGNA-GRIP®, MAGNA-LOK®, BOM® AND C6L® ARE REGISTERED TRADEMARKS OF ALCOA INC. KENWORTH® AND PETERBILT® ARE REGISTERED TRADEMARKS OF PACCAR INC. FREIGHTLINER® IS A REGISTERED TRADEMARK OF DAIMLER TRUCKS NORTH AMERICA, LLC. MACK® IS A REGISTERED TRADEMARK OF MACK TRUCKS, INCeBay integration by