Car wash lift logo

CAR WASH SERVICE LIFT LAHORE

by Unknown author

Monoblock Belt Clips – Inside-The-Waistband/IWB Holster Mounting Attachments

Monoblock Belt Clips – Inside-The-Waistband/IWB Holster Mounting Attachments The Monoblock belt clip is designed to be mounted directly to a holster/sheath surface. This clip design allows for a very secure carry on belts, waistlines, or any attachment point where the spring steel clip tabs can be positioned securely. Each spring tab has an integrated security clutch to prevent it from easily becoming detached from the mounting point. The Monoblock clip comes in a standard DMG/Cu finish in dark matte grey and is non-reflective. It resists corrosion very well and can be buffed with most over-the-counter lubricants to remove surface blemishes and wear marks. This clip is a versatile and cost effective attachment solution that can be adapted to virtually any gun holster, knife sheath or carry item. Specifications Overall Length: 2.73 Inches Fits: Up to 1.5 Inch Belts Finish: Dark Grey (DMG/Cu) Engraving Included: (Select Above) Reflective: No Hole Pattern: (2)(Slotted) 0.220 height x 0.300 inch width Hole Spacing: (Adjustable) 0.860 – 1.15 inch on centers Hardware Included: (Select Above)Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)

by Unknown author

RCS Belt Claw – Holster Claw – Left & Right – (w/Mounting Hardware)

RCS Belt Claw – Holster Belt Claw – Left & Right – (w/Mounting Hardware) The RCS belt claw holster attachment is made to create leverage for the grip of a pistol and helps to keep it close to the body without disrupting the draw. The pre-drilled hole spacing is 1.5cm center-to-center. Raven Concealment designed their claw holster attachments to resist failure and mitigate stress fractures. This value-priced combo is the 1-pack with mounting hardware included. Each RCS Belt Claw (Right) comes with (2) AV-SP-125-BK slotted post, (2) Oval Head Phillips Drive Screw (AV-832OHP-BK-625), and (2) W-EPDM-500180125 washer. This mounting hardware setup is perfect for most applications. Specifications: Raven Concealment Color: Tactical Black Material: Proprietary Polymer Configuration: Right Mounting Hardware Included: Yes Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see (https://www.ebay.com/usr/ckkindustries)

by Unknown author

Metal Belt Clips – Model 3 – Holster Belt Clips – Slip-Through Retainer Mount

Metal Belt Clips – Model 3 – Holster Belt Clips – Slip-Through Retainer Mount Model 3 (Tactical Finish): This is the Model 3 design universal sheath/holster belt clip. It is excellent for mounting on KYDEX and leather with retainer carry systems and are very durable. This model is black (tactical style) and is common on military sheaths/holsters. This value-priced combo is the 1-pack, 2-pack, and 4-pack. This mounting setup is perfect for retainer mounting applications. Specifications: Universal Sheath/Holster Clip Black (Tactical) Finish Mounting Type: Slip-Through Retainer (2.10 x 1.25 x 0.25) inches Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. 4-Pack = 4 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)

by Unknown author

Raven Concealment – Overhook Strut – (Fits Up to 1.75in Belts) – (w/Hardware)

Raven Concealment – Overhook Strut – (Fits Up to 1.75in Belts) – (w/Mounting Hardware Options) Raven Concealment Overhook Struts offer a tough snap over to guarantee a snug fit with an easy release. There are ridges on the back of the strut that prevent mounting hardware from damaging sheaths and knives. Each of the pre-drilled holes are 15mm apart center-to-center. With the center hole being a slot, the strut can be rotated up to 10 degrees in either direction. Mounting Hardware Option: Each Raven Concealment Overhook Strut comes with (3) AV-SP-250-BK slotted post, (3) Truss Head Phillips Drive Screw (AV-832THP-BK-312), and (3) W-EPDM-500180125 washer. This mounting hardware setup is perfect for most applications. Specifications Raven Concealment Color: Tactical Black Material: Proprietary Polymer Pre-Drilled: Yes Mounting Hardware Included: Yes (If Selected) Belt size: Up to 1.75 inches Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)

by Unknown author

Molle-Lok – Molle Mounting Attachment – (Fits 1.50-3.00in) – (Hardware Optional)

Molle-Lok – Molle Mounting Attachment – (Fits 1.50-3.00in) – (Hardware Optional) The Molle-Lok is a spring loaded mounting attachment. With this design, there is no need for special tools to open the new locking mechanism. All you do is grasp outer heads and slide to manipulate and remove. This new locking system is reusable and failsafe, a requirement of US Military forces. The Molle-Lok is an innovative attachment system which is designed as an optional attaching device for the Military and Law enforcement. The Molle-Lok attaches accessories to the Pals/Molle body armor or load bearing equipment, vests, tactical bags, pouches etc. The adjustable design features mounting points from 1.50 to 2.20 inches in width. Hardware Option: Each Molle-Lok comes with (2) AV-SP-1875-BK slotted posts, (2) AV-832FHP-BK-375 Flat Head Phillips Drive Screws, and (2) W-EPDM-500180125 washers. This mounting hardware setup is perfect for most applications. Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)

by Unknown author

ModWings – Ambidextrous Hand Carry Belt Claws – (Mounting Hardware Optional)

ModWings – Ambidextrous Hand Carry Belt Claws – (Mounting Hardware Optional) The ModWing is a standalone piece of concealment-enhancing hardware. It allows a user’s belt to apply additional leverage by rotating the holster and the grip of the gun towards the user’s body, creating better concealment and less user “printing” of the firearm and holster. It is available in two versions, standard and light-bearing. This is the standard model. Interchangeable inserts allow the user to choose a strong or mild rotation, based on the user’s attire. The aggressive texture molded into the insert face increases the stability of the ModWing, in turn, the firearm and holster. Each ModWing kit comes complete with a Spine, 2 Interchangeable Riser Inserts, and Assembly Hardware. Due to the inserts being interchangeable, and the reversible spine, the ModWing is ambidextrous and can be configured for RH or LH carry. This feature allows the thermoformer to limit their inventory while having to only keep a single item in stock. Mounting Hardware Optional (Select Above): Each ModWing Claw comes with (2) AV-SP-375-BK slotted posts, (2) AV-832THP-BK-500 Truss Head Phillips Drive Screws, and (2) W-EPDM-500180125 washers. This mounting hardware setup is perfect for most applications. Specifications ModWing – Standard and Light Bearing Dimensions: (3.00 x 0.25) Inches Mounting Holes (center-to-center): 0.625 Inches Carry: Ambidextrous Injection Molded Color: Tactical Black Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see (https://www.ebay.com/usr/ckkindustries)

by Unknown author

Metal Belt Clips – Model 5 – Holster Belt Clips – (w/SPTHA Mounting Hardware)

Metal Belt Clips – Model 5 – Holster Belt Clips – (w/SPTHA Mounting Hardware) Model 5 (Tactical Finish): This is the Model 5 belt clip. It is excellent for mounting on KYDEX and leather carry systems and is very durable. This model is Black coated (Tactical style) and is common on military sheaths. Each Model 5 3-Hole holster belt clip comes with (3) AV-SP-125-BK slotted post, (3) Truss Head Phillips Drive Screw (AV-832THP-BK-250), and (3) W-EPDM-500180125 washer. This mounting hardware setup is perfect for most applications. Specifications: Universal Sheath/Holster Clip Black (Tactical) Finish Fits Belt Size: 1.50″ Hole Diameter: 0.2187″ Hole Spacing: 0.500″ (3.75 x 0.60 x .06) inches Sold Individually: 1-Pack = 1 QTY. 2-Pack = 2 QTY. 4-Pack = 4 QTY. For more holster making kits, holster making supplies, and sheath making supplies, see ( https://www.ebay.com/usr/ckkindustries)

Type to search