CAR WASH SERVICE LIFT LAHORE

by Unknown author

KSD301 NC 45°C to 250°C Thermostat Temperature Switch 10A 250V SHIPS FROM USA!!!

YOU ARE BUYING 1 PIECE OF THERMAL SWITCH Ships from USA and I will provide a USPS tracking number! DESCRIPTION Product Name: Thermostat Model: KSD301Action Type: Normally Closed (N.C.)Action Temperature: 45°C to 250°C (Celsius) / 113°F to 482°F (Fahrenheit) Voltage: AC 250VCurrent: 10A @ 250V / 16A @ 125VTolerance: ±5 ±10ºCBlade Terminals: 1/4″ – 6.3mmMaterial: Metal and Black Plastic for models 45°C to 185°CMaterial: Metal and White Ceramic for models 190°C to 250°C Package: 1 x Temperature Switch Thermostat. Switch terminals connect (closed circuit) at normal temperature until the surface temperature reaches the chosen model’s temperature, then the circuit terminals disconnects (opens circuit) and stops passing voltage. When surface temperature cools off about 5 degrees from chosen model’s temperature, then the circuit terminals automatically reconnect (closed circuit). General-purpose, compact, large capacity, minute current thermostat. Application: for Small household electric appliances, PC, projects.

by Unknown author

W3230 110-220V High Precision Digital Temperature Controller Thermostat -50~120℃

W3230 Temperature ControllerThemo probe sensor (NTC10K-type)20A Digital LED DisplayThermostat with Heat/Cooling Instrument110-220V Specifications Power Supply AC 110V-220V Temperature Control Range -55℃ – 120℃ Resolution Ratio 0.1°C (-9.9 to 99.9); 1°C (other range) Color of Displaying Red / Blue Measurement accuracy ±0.1°C Control accuracy 0.1°C Sensor NTC10K Waterproof sensor Output Relay Contact Capacity 20A 12V / 10A 220V Environmental requirements -10-60°C, humidity 20%-85%RH Dimension 79mm x 43mm x 26mm (3.11” x 1.69” x 1.02”) Cutting Size 73mm*39mm (2.87” x 1.54”) Sensor wire 1 meter (39.37”) Features 1. Portable temperature controller. 2. LED display for better readability. 3. Wide temperature measuring range.(-50°C-110°C) 4. Heating or cooling control. 5. All parameters setting can be saved after short circuit. 6. Relay output. 7. High Control precision 0.1 centigrade 8. It can be used for domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial equipment and other temperature-controlled system. Typical Setup Connect 110~220 volts A/C power supply and switchable equipment Controller displays the measured temperature Press the SET button once, and the temperature on the display will flash. Press +/- to set the desired temperature (press and hold +/- to quickly rise and lower setpoint) After completion, press SET to confirm Controller automatically energizes the relay on and off according to your settings. The output of the thermostat is 20A relay, capable of meeting various power loads. After connecting the power, the thermostat display screen shows the ambient temperature. Function description (long press of Set button) P0: Refrigeration or heating mode P1: Return difference setting P2: Maximum temperature setting upper limit P3: Minimum temperature setting lower limit P4: Temperature correction P5: Delay start time (unit: minute) FREE SHIPPING !!! SHIPPING We are not quite sure from where or how eBay gets its estimated shipment receipt date, but it seems to be varying from days to weeks for the same item!!! We strive to ship every order within 1 business day (We do NOT ship on weekends). We use (primarily) USPS 1st Class postage service with tracking. USPS does a GREAT job of handling our thousands of packages. They have a few glitches now and then but overall, they provide excellent service. Note that we are not privy to USPS tracking information beyond what you can retrieve via eBay or USPS. If you have ANY questions about your purchase, parcel logistics, etc. please feel free to either send us (using your eBay account) an email detailing the problem OR file a formal request with eBay. We ALWAYS respond to such cases in a positive supportive manner. FEEDBACK Leaving neutral or negative feedback without an attempt to communicate your concern or complaint does nothing to solve your problem. If you are voicing a problem through feedback, we only learn of your dissatisfaction well after the problem has occurred without an opportunity to make the matter right. If you have a problem with the product or an inquiry on the delivery of your order, ASK US!!! Give us a chance to make it right. We are here to make your buying experience a fast, efficient, cost-effective, and pleasant experience. STANDARD DISCLAIMER This Ebay Account Holder is furnishing this item “as is”. We do not provide any warranty of the item whatsoever, whether express, implied, or statutory, including, but not limited to, any warranty of merchantability or fitness for a particular purpose or any warranty that the contents of the item will be error-free. In no respect shall we incur any liability for any damages, including, but limited to, direct, indirect, special, or consequential damages arising out of, resulting from, or any way connected to the use of the item, whether or not based upon warranty, contract, tort, or otherwise; whether or not injury was sustained by persons or property or otherwise; and whether or not loss was sustained from, or arose out of, the results of, the item, or any services that may be provided by this Ebay account. If a recognizable item appears in this account, use for commercial purposes may infringe a right of privacy or publicity. It may not be used to state or imply the endorsement by this Ebay account holder of a commercial product, process or service, or used in any other manner that might mislead. Accordingly, it is requested that if this account is used in advertising and other commercial promotion, layout and copy be submitted to this Ebay Account Holder prior to release. It may not be used to state or imply the endorsement by this Ebay Account Holder of a commercial product, process or service, or used in any other manner that might mislead. For industrial, hobbyist or experimental use only. We cannot offer advice on a specific application. Buyer should be aware of all necessary federal, state and local safety precautions that may be needed for the proper safe use of the purchased item. Any warranties are limited to replacement of product.

by Unknown author

STC-1000 Digital Temperature Controller Thermostat w/ Sensor AC 110V Universal

Product Description Features: The bright digital tube is clearly displayed, and it can be clearly read whether it is used during the day or at night. Switch the modes cool and heat, control temperature by setting the temperature set value and the different value. Temperature calibration, refrigeration control output delay protection,alarm when temperature exceeds temperature limit or when sensor error. Specifications: Temperature Control Range: -50 to 99 degree centigrade Resolution: 0.1? Control Accuracy: +/- 0.1 degree centigrade Sensor: NTC 10K L = 1M waterproof probe Power consumption: <3W Power supply: AC/DC 110V-220V Relay contact capacity: Cool(10A/220VAC), heat(10A/220VAC) Ambient temperature: 0?- 60? Storage temperature: -30?-75? Relative humidity: 20-84% Size: 2.76 x 1.06 x 3.35inches Front Panel Size: 1.34 x 2.95inches Sensor length: 1m(include the probe) Package Includes: 1 x Digital Temperature Controller 1 x Instruction Manual Warm Notes: Manual measurement, please allow slight errors on size. The colors may exist slight difference due to different screens. On Oct 29, 2023 at 19:12:52 PDT, seller added the following information:

by Unknown author

W1209 12V -50-110°C Digital Thermostat Temperature Control Switch Sensor Module

W1209 12V -50°C to +110°C Digital Thermostat Temperature Control Switch Sensor Module The W1209 is a low cost yet highly functional thermostat controller. This module intelligently controls power to most types of electrical devices based on the temperature sensed by the included high accuracy NTC remote temperature sensor. The cooler, heater or fan is connected to a power supply (either DC or AC) through the relay contacts K0 and K1, and the temperature on/off setpoints are programmed into the W1209 using the onboard Set, Increase and Decrease buttons and display. The relay contacts are then open and closed, acting as a power switch for the cooler/heater, based on the temperature measured by the NTC temperature sensor (included with the module) and the setpoints programmed into the W1209 controller. The module is powered by a DC power supply or battery in the range of 9V to 12V. Although this module has an embedded microcontroller, no programming knowledge is required. 3 tactile switches allow for configuring various parameters including on & off trigger temperatures. The on-board relay can switch up to a maximum of 20A at 14V DC, 16A at 24V DC, or 7A at 125V AC. The current temperature is displayed in degrees Centigrade via its 3 digit seven segment display and the current relay state by an on-board LED. Specifications:Temperature Control Range: -50 C to +110 C (NOTE: All temperatures are in Celsius, not Fahrenheit)Resolution at -9.9 to 99.9: 0.1 CResolution at all other temperatures: 1 CMeasurement Accuracy: 0.1 CControl Accuracy: 0.1 CRefresh Rate: 0.5 SecondsInput Support Power (DC): 9V minimum to 12V maximum. The maximum current draw is 65mA (operates the module, does not power the load). NOTE: The maximum input support voltage should not exceed 12V. In applications such as an automobile or RV where the battery voltage can exceed 12V, a regulator circuit such as a 1N5349A zener diode and a series resistor in the range of 20 Ohm 1W should be used to limit the voltage to 12V. Alternately, a 12V to 9V buck voltage converter with the input to the converter connected to the battery and the output to the W1209 will provide a stable 9V DC supply for the W1209. Measuring Input: NTC (10K 0.5%)Waterproof Sensor: 0.5M cableProbe tip dimensions: 20mm long x 4mm diameterOutput: 1 Channel Relay Output, Capacity: 20A at 14VDC, 16A at 24VDC, or 7A at 125VACPower Consumption: Static Current: <=35mAMaximum Operating Current: <=65mAEnvironmental Requirements:Temperature: -10 ~ 60 CHumidity: 20-85%Dimensions & Weight:48mm x 40mm x 14mm (1.9" x 1.6" x 0.6") (LxWxH)Weight: 19 grams (Controller – 16 grams; temperature sensor and cable – 3 grams)The display defaults to showing the measured temperature.Short press the "SET" button and then press "+" and "-" buttons to raise or lower the temperature setpoint. Long press the “SET” button to activate the menu in order to change the P0 through P6 parameters listed in the Settings Chart below.The setpoint and all parameter settings are stored in nonvolatile memory and will be retained if power to the controller is turned off. Settings Chart:Code: Description / Range / Default ValueP0: Set Heating or Cooling Mode / C/H / CP1: Hysteresis Set / 0.1C – 15C / 2CP2: Upper Temperature Limit / 110C / 110CP3: Lower Temperature Limit / -50C / -50CP4: Temperature Calibration / -7.0C ~ 7.0C / 0CP5: Delay Start Time / 0-10 mins / 0 minsP6/P7: High Temperature Alarm / 0C – 110C / OFFP8: Factory Reset (Not included in all firmware versions. Can also be reset by pressing and hold the + and – buttons for 5 seconds.) Package Includes:W1209 12V -50°C – 110°C Digital Thermostat Temperature Control Switch Sensor ModuleNTC 10K Temperature Sensor with ~20 inch (0.5M) cableOnline installation and operating instructions (Available in English and Spanish / Disponible en inglés y español) Need a longer probe? See our 1 Meter long NTC Thermistor Probe here. Looking for a W1209 Controller with a plastic case/enclosure? See our W1209 12V -50-110°C Digital Thermostat Temperature Control Switch Sensor + Case. Get it faster! Stocks and ships from our US Colorado office for quick delivery. We provide FREE USPS First Class Shipping with Tracking – Not Economy ShippingW1209 12V -50-110°C Digital Thermostat Temperature Control Switch Sensor + Case.

by Unknown author

W1209 12V -50-110°C Digital Thermostat Temperature Control Switch Sensor 2 Pack

W1209 12V -50°C to +110°C Digital Thermostat Temperature Control Switch Sensor Module 2 Pieces The W1209 is a low cost yet highly functional thermostat controller. This module intelligently controls power to most types of electrical devices based on the temperature sensed by the included high accuracy NTC remote temperature sensor. The cooler, heater or fan is connected to a power supply (either DC or AC) through the relay contacts K0 and K1, and the temperature on/off setpoints are programmed into the W1209 using the onboard Set, Increase and Decrease buttons and display. The relay contacts are then open and closed, acting as a power switch for the cooler/heater, based on the temperature measured by the NTC temperature sensor (included with the module) and the setpoints programmed into the W1209 controller. The module is powered by a DC power supply or battery in the range of 9V to 12V. Although this module has an embedded microcontroller, no programming knowledge is required. 3 tactile switches allow for configuring various parameters including on & off trigger temperatures. The on-board relay can switch up to a maximum of 20A at 14V DC, 16A at 24V DC, or 7A at 125V AC. The current temperature is displayed in degrees Centigrade via its 3 digit seven segment display and the current relay state by an on-board LED. Specifications:Temperature Control Range: -50 C to +110 C (NOTE: All temperatures are in Celsius, not Fahrenheit)Resolution at -9.9 to 99.9: 0.1 CResolution at all other temperatures: 1 CMeasurement Accuracy: 0.1 CControl Accuracy: 0.1 CRefresh Rate: 0.5 SecondsInput Support Power (DC): 9V minimum to 12V maximum. The maximum current draw is 65mA (operates the module, does not power the load). NOTE: The maximum input support voltage should not exceed 12V. In applications such as an automobile or RV where the battery voltage can exceed 12V, a regulator circuit such as a 1N5349A zener diode and a series resistor in the range of 20 Ohm 1W should be used to limit the voltage to 12V. Alternately, a 12V to 9V buck voltage converter with the input to the converter connected to the battery and the output to the W1209 will provide a stable 9V DC supply for the W1209. Measuring Input: NTC (10K 0.5%)Waterproof Sensor: 0.3M cableProbe tip dimensions: 20mm long x 4mm diameterOutput: 1 Channel Relay Output, Capacity: 20A at 14V DC, 16A at 24V DC, or 7A at 125V ACPower Consumption: Static Current: <=35mAMaximum Operating Current: <=65mAEnvironmental Requirements:Temperature: -10 ~ 60 CHumidity: 20-85%Dimensions & Weight:48mm x 40mm x 14mm (1.9" x 1.6" x 0.6") (LxWxH)Weight: 19 grams (Controller – 16 grams; temperature sensor and cable – 3 grams)The display defaults to showing the measured temperature.Short press the "SET" button and then press "+" and "-" buttons to raise or lower the temperature setpoint. Long press the “SET” button to activate the menu in order to change the P0 through P6 parameters listed in the Settings Chart below.The setpoint and all parameter settings are stored in nonvolatile memory and will be retained if power to the controller is turned off. Settings Chart:Code: Description / Range / Default ValueP0: Set Heating or Cooling Mode / C/H / CP1: Hysteresis Set / 0.1C – 15C / 2CP2: Upper Temperature Limit / 110C / 110CP3: Lower Temperature Limit / -50C / -50CP4: Temperature Calibration / -7.0C ~ 7.0C / 0CP5: Delay Start Time / 0-10 mins / 0 minsP6/P7: High Temperature Alarm / 0C – 110C / OFFP8: Factory Reset (Not included in all firmware versions. Can also be reset by pressing and holding the + and – buttons for 5 seconds.) Package Includes:2X (2 Pieces) W1209 12V -50°C – 110°C Digital Thermostat Temperature Control Switch Sensor Modules2X (2 Pieces) NTC 10K Temperature Sensor with ~20 inch (0.5M) cableOnline installation and operating instructions (Available in English and Spanish / Disponible en inglés y español) Need a longer probe? See our 1 Meter long NTC Thermistor Probe here. Looking for a W1209 Controller with a plastic case/enclosure? See our W1209 12V -50-110°C Digital Thermostat Temperature Control Switch Sensor + Case. Get it faster! Stocks and ships from our US Colorado office for quick delivery. We provide FREE USPS First Class Shipping with Tracking – Not Economy ShippingW1209 12V -50-110°C Digital Thermostat Temperature Control Switch Sensor + Case.