Car wash lift logo

CAR WASH SERVICE LIFT LAHORE

by Unknown author

(50) 1/4-20×1-1/2 Stainless Trailer Floor Floorboard Deck Screws 1/4×1-1/2

WELCOME TO RIVERCITY INDUSTRIAL SUPPLY!FREE SHIPPING ON THIS ITEM!!! BOLT NUTS (6887)THIS LISTING IS FOR BRAND NEW TRAILER DECK FLOOR SCREWS TYPE F THREAD CUTTING TORX DRIVE. WE STRONGLY RECOMMEND USING ANTI SEIZE WHEN INSTALLING THESE SCREWS.You will get the following:50 PIECES OF THE 1/4-20 X 1-1/2 FLAT HEAD THREAD CUTTING SCREWS STAINLESS STEEL. THEY ARE: FULLY THREADED TYPE F THREAD CUTTING T-27 TORX DRIVE (6LOBE) REQUIRES A PRE DRILLED HOLE WITH A 7/32 DRILL BIT. NEED A DRILL BIT? WE HAVE EM. SCREW SPECS: Screw Diameter: 1/4″Screw Threads: 20 (TPI)Screw Length: 1-1/2″Torx Drive: T-27 MONEY BACK GUARANTEE.WE STRONGLY RECOMMEND USING ANTI SEIZE WHEN INSTALLING THESE SCREWS.IF YOU HAVE ANY PROBLEMS JUST CALL US, WE WILL MAKE IT RIGHT OR REFUND YOUR MONEY . NEED THE 7/32 DRILL BIT AND DRIVER BIT??? LET US KNOW, WE HAVE THEN IN STOCK AND READY TO SHIP. Copyright © 2016 Rivercity Fastener & Supply. All Rights Reserved.FREE SHIPPING ON THIS ITEM!!These are high quality fasteners that were NOT previously rejected for quality issues or rescued from a scrap yard.We only sell new unused fasteners. Looking for another size or quantity? Please e-mail or call us and we will create a listing with what you need. 763-789-2658HAVE ANY QUESTIONS OR COMMENTS?WE ARE ALWAYS LOOKING FOR MORE AND YOUR IDEAS OF WHAT TO LIST ON EBAY.WE CARRY A FULL LINE OF METRIC AND STANDARD THREAD FASTENERS.For more tools and fasteners please view my other items.PAYMENT:An Unpaid Item Case Will Be Opened If Payment Is Not Received Within Seven day of Purchase Date.PAYPALVISAMASTERCARDDISCOVER CARDAMERICAN EXPRESSWE DO NOT ACCEPT PERSONAL CHECKS OR BUSINESS CHECKS.PAYMENT IS DUE WITHIN 1 DAYS OF THE END OF AUCTION.SHIPPING:SAME DAY SHIPPING ON MOST ORDERS AS LONG AS WE RECEIVE YOUR PAYMENT BY 3:00PM CST MONDAY-FRIDAY.FEEDBACK:We maintain high standards of excellence and strive for 100% customer satisfaction! + Positive feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can address / correct your concerns. Five Star Service is Our Goal! We strive to earn 100% perfect “FIVE STAR” scores from you. The star scores are very important to us because eBay uses them to determine our visibility in search results. So, before you post permanent feedback…if anything about the transaction does not meet your expectations… please let us know and give us the chance to make things RIGHT. PLEASE VIEW OUR FEEDBACK! WE WANT ALL OF OUR CUSTOMERS TO BE HAPPY!WE LEAVE POSITIVE FEEDBACK FOR ALL OF OUR CUSTOMERS AS SOON AS WE RECEIVE YOUR PAYMENT WE WILL AUTOMATICALLY LEAVE FEEDBACK FOR YOU.IF YOU ARE NOT HAPPY WITH YOUR PURCHASE TELL US.IF YOU ARE HAPPY WITH YOUR PURCHASE PLEASE TELL OTHERS!If you do not see the size or quantity that you desire, please email me at the ASK A QUESTION for a quote on the size or quantity you would like to purchase. We will customize the order to the quantity, LARGE OR SMALL, that you desire. Copyright © 2016 Rivercity Fastener & Supply. All Rights Reserved. All rights reserved copyright 2016 photos, listing, headings and descriptions.All text in this listing belong to Rivercity Fastener & Supply and can not be copied or used at anytime in anyway. THANK YOU.

by Unknown author

1.60mm (.0630″) 2 FLUTE CARBIDE ENDMILL X-TEND FLUTE Kyocera Tycom 1600.0630.315

100% of orders shipped on time and same day if received by 3:00pm CST. We ship every weekday and most Saturdays. MADE IN USA. For sale are new 1.60mm (.0630″) two-flute, solid carbide endmills. These endmills are made by Kyocera Tycom. These tools are normally sold into the printed circuit board market. This endmill is designed with a long flute length for this diameter for milling into deep pockets. These endmills can be used for your plastic, soft media, wood, or metal (such as aluminum or copper) milling. part number: 1600.0630.315 diameter size # flutes length of cut shank OAL end-style .0630″ 1.60mm 2 .315″ .125” 1.5” center-cut Each tool has a collet locating ring for identification and quick change depth control. Kyocera Tycom products are manufactured with the finest carbide grades available. As a result, Kyocera Tycom applies the latest developments in material science to the design and manufacture of precision cutting tools. You’ll not find a better endmill at this price. The “rules of the tools” apply. What this means is that all unused tools can be returned for a full refund (minus freight), no questions asked. The price of the sale is for each individual endmill. SHIPPING: Save on shipping costs by combining the shipping charges for multiple purchases of other store items. If the shipping charges don’t look right, don’t pay but instead send me an email so I can send a corrected invoice. US FLAT RATE SHIPPING OPTIONS: $4.50 1st class mail $4.50 priority mail – includes 50 pack storage box INTERNATIONAL SHIPPING OPTIONS: INTERNATIONAL SHIPPING CHARGES ARE CALCULATED delivery time varies by country – 1st class mail – priority mail small flat rate box – priority mail standard – includes tracking number – express mail – includes tracking numberPlease email with questions, and feel free to check out my other listings and auctions. Check out my other items! Be sure to add me to your favorites list!

by Unknown author

(5) – 1.60mm (.0630″) 2 flute endmills, Overstock Sale 1600-0630.250

Shipping is combined on all orders. Don’t be alarmed if Ebay shows a high shipping cost per piece. Ebay will discount the shipping to a flat rate (for domestic orders) at checkout. Let me know if there are questions on shipping. 100% of orders shipped on time and same day if received by 3:00pm CST. We ship every weekday and most Saturdays. Overstock Sale – for a limited time only.MADE IN USA. For sale are 5 new 1.60mm (.0630″) two-flute, solid carbide endmills. These endmills are made by Kyocera Tycom. These tools are normally sold into the printed circuit board market. These endmills can be used for your plastic, soft media, wood, or metal (such as aluminum or copper) milling. part number: 1600-0630.250 diameter size # flutes length of cut shank OAL end-style .0630″ 1.60mm 2 .250″ .125” 1.5” center-cut Kyocera Tycom products are manufactured with the finest carbide grades available. As a result, Kyocera Tycom applies the latest developments in material science to the design and manufacture of precision cutting tools. You’ll not find a better endmill at this price. The “rules of the tools” apply. What this means is that all unused tools can be returned for a full refund (minus freight), no questions asked. The price of the sale is for 5 endmills. SHIPPING: Save on shipping costs by combining the shipping charges for multiple purchases of other store items. If the shipping charges don’t look right, don’t pay but instead send me an email so I can send a corrected invoice. US FLAT RATE SHIPPING OPTIONS: $4.50 1st class mail $9.00 priority mail – includes 50 pack storage box INTERNATIONAL SHIPPING OPTIONS: INTERNATIONAL SHIPPING CHARGES ARE CALCULATED – 1st class mail – priority mail small flat rate box ABOVE OPTIONS MAY TAKE8-10 WEEKS FOR DELIVERY – priority mail standard – includes tracking number – express mail – includes tracking numberCheck out my ebay store for other great deals on carbide endmills, drills, and router burrs – Please email with questions, and feel free to check out my other listings and auctions. Check out my other items! Be sure to add me to your favorites list!

by Unknown author

(5) 1.60mm (.0630″) 2 FLUTE CARBIDE ENDMILL STUB BALL ALTIN COATED 1635-0630L095

100% of orders shipped on time and same day if received by 3:00pm CST. We ship every weekday and most Saturdays. Use the shopping cart feature to combine all your items into one order, with one shipping charge. Don’t be alarmed if Ebay shows a high shipping cost per piece. Ebay will discount the shipping to a flat rate (for domestic orders) at checkout. Let me know if there are questions on shipping. MADE IN USA – TEMPORARY SALE ON THIS ITEM For sale are (5) 1.60mm (.0630″) new two-flute, solid carbide endmills. These endmills are made by Kyocera Microtools. They are short flute (stub) and have a ball end endstyle. They are AlTiN coated to add tool life. part number: 1635-0630L095 diameter size # flutes length of cut shank OAL end-style .0630″ 1.60mm 2 .095″ .118” 1.5” ball end Brand: KyoceraPart Number: 1635-0630L095Item Type: 2 Flute Stub Length Ball Nose End MillSeries: Series 1635Coating: AlTiN CoatedFlutes: 2 FluteDiameter: 1.60mmShank: 3mmLength of Cut (LOC): 2.40mmOverall Length (OAL): 38mmReach Length: N/ARadius: N/APoint Angle: N/APrimary Applications: Steel ~30HRC, Steel 30~40HRC, Hardened Steel ~55HRCAdditional Applications: Hardened Steel ~68HRC, Stainless Steel, Cast Iron, Nickel & Cobalt, Titanium AlloyKyocera Microtool products are manufactured with the finest carbide grades available. As a result, Kyocera Microtools applies the latest developments in material science to the design and manufacture of precision cutting tools. You’ll not find a better endmill at this price. The “rules of the tools” apply. What this means is that all unused tools can be returned for a full refund (minus freight), no questions asked. The price of the sale is 5 endmills. SHIPPING: Save on shipping costs by combining the shipping charges for multiple purchases of other store items. If the shipping charges don’t look right, don’t pay but instead send me an email so I can send a corrected invoice. US FLAT RATE SHIPPING OPTIONS: $4.50 1st class mail $9.00 priority mail INTERNATIONAL SHIPPING OPTIONS: INTERNATIONAL SHIPPING CHARGES ARE CALCULATED delivery time varies by destination – 1st class mail – priority mail small flat rate box – priority mail standard – includes tracking number – express mail – includes tracking number Please email with questions, and feel free to check out my other listings and auctions. Check out my other items! Be sure to add me to your favorites list!

Type to search