10 – 1.60mm (.0630″) 2 flute endmills, new
These endmills are made by Kyocera Tycom. These tools are normally sold into the printed circuit board market. The price of the sale is for 10 endmills. The “rules of the tools” apply.
1.60mm (.0630″) Carbide End Mill 4 Flute Stub Kyocera 1820-0630.089
These endmills are made by Kyocera Microtools.They should be strong with little deflection given the stub flute. You’ll not find a better endmill at this price. Shank Type Straight/Cylindrical. Cut Type Center Cutting.
(5) 1.60mm (.0630″) CARBIDE END MILL 2 FLUTE NO RING – KEMMER KTTSFAI063029502R
They are very sharp, and great for soft material milling (plastic, wood, etc.) These are very nice endmills with a bright finish. They have a fishtail endstyle high speed milling. The “rules of the tools” apply.
(5) – 1.60mm (.0630″) Carbide End Mills, 2 Flute Kyocera 1600Q0630.280A1
100% of orders shipped on time and same day if received by 3:00pm CST. We ship every weekday and most Saturdays. Use the shopping cart feature to combine all your items into one order, with one shipping charge. Don’t be alarmed if Ebay shows a high shipping cost per piece. Ebay will discount the shipping to a flat rate (for domestic orders) at checkout. Let me know if there are questions on shipping. MADE IN USA For sale are 5 new 1.60mm (.0630″) two-flute, solid carbide endmills. These endmills are made by Kyocera Tycom. These tools are normally sold into the printed circuit board market. These have a long, .280″ flute length. These endmills can be used for your plastic, soft media, wood, or metal (such as aluminum or copper) milling. These have a collet locating ring for easy and quick tool change. part number: 1600Q0630.280A1 diameter size # flutes length of cut shank OAL end-style .0630″ 1.60mm 2 .280″ .125” 1.5” center-cut Kyocera Tycom products are manufactured with the finest carbide grades available. As a result, Kyocera Tycom applies the latest developments in material science to the design and manufacture of precision cutting tools. You’ll not find a better endmill at this price. The “rules of the tools” apply. What this means is that all unused tools can be returned for a full refund (minus freight), no questions asked. The price of the sale is for 5 endmills. SHIPPING: Save on shipping costs by combining the shipping charges for multiple purchases of other store items. If the shipping charges don’t look right, don’t pay but instead send me an email so I can send a corrected invoice. US FLAT RATE SHIPPING OPTIONS: $4.50 1st class mail $9.00 priority mail – includes 50 pack storage box INTERNATIONAL SHIPPING OPTIONS: INTERNATIONAL SHIPPING CHARGES ARE CALCULATED – Ebay International Shipping through DHL – priority mail small flat rate box – priority mail standard – includes tracking number – express mail – includes tracking numberCheck out my ebay store for other great deals on carbide endmills, drills, and router burrs. Please email with questions, and feel free to check out my other listings and auctions. Check out my other items! Be sure to add me to your favorites list!
(5) – 1.60mm (.0630″) 2 flute endmills, Overstock Sale 1600-0630.250
Shipping is combined on all orders. Don’t be alarmed if Ebay shows a high shipping cost per piece. Ebay will discount the shipping to a flat rate (for domestic orders) at checkout. Let me know if there are questions on shipping. 100% of orders shipped on time and same day if received by 3:00pm CST. We ship every weekday and most Saturdays. Overstock Sale – for a limited time only.MADE IN USA. For sale are 5 new 1.60mm (.0630″) two-flute, solid carbide endmills. These endmills are made by Kyocera Tycom. These tools are normally sold into the printed circuit board market. These endmills can be used for your plastic, soft media, wood, or metal (such as aluminum or copper) milling. part number: 1600-0630.250 diameter size # flutes length of cut shank OAL end-style .0630″ 1.60mm 2 .250″ .125” 1.5” center-cut Kyocera Tycom products are manufactured with the finest carbide grades available. As a result, Kyocera Tycom applies the latest developments in material science to the design and manufacture of precision cutting tools. You’ll not find a better endmill at this price. The “rules of the tools” apply. What this means is that all unused tools can be returned for a full refund (minus freight), no questions asked. The price of the sale is for 5 endmills. SHIPPING: Save on shipping costs by combining the shipping charges for multiple purchases of other store items. If the shipping charges don’t look right, don’t pay but instead send me an email so I can send a corrected invoice. US FLAT RATE SHIPPING OPTIONS: $4.50 1st class mail $9.00 priority mail – includes 50 pack storage box INTERNATIONAL SHIPPING OPTIONS: INTERNATIONAL SHIPPING CHARGES ARE CALCULATED – 1st class mail – priority mail small flat rate box ABOVE OPTIONS MAY TAKE8-10 WEEKS FOR DELIVERY – priority mail standard – includes tracking number – express mail – includes tracking numberCheck out my ebay store for other great deals on carbide endmills, drills, and router burrs – Please email with questions, and feel free to check out my other listings and auctions. Check out my other items! Be sure to add me to your favorites list!
(5) 1.60mm (.0630″) CARBIDE END MILL 2 FLUTE FT END – KEMMER KTTSFAI063029502R
100% of orders shipped on time and same day if received by 3:00pm CST. We ship every weekday and most Saturdays. Use the shopping cart feature to combine all your items into one order, with one shipping charge. Don’t be alarmed if Ebay shows a high shipping cost per piece. Ebay will discount the shipping to a flat rate (for domestic orders) at checkout. Let me know if there are questions on shipping. New Product Listing. For sale are (5) 1.60mm (.0630″) new two-flute, solid carbide endmills. These endmills are made by Kemmer Precision. They are very sharp, and great for soft material milling (plastic, wood, etc.) These are very nice endmills with a bright finish. They have a fishtail endstyle high speed milling. part number: KTTSFAI063029502R diameter size # flutes length of cut shank OAL end-style .0630″ 1.60mm 2 .295″ .125” 1.5” fishtail Each tool has a collet locating ring for identification and quick change depth control. The “rules of the tools” apply. What this means is that all unused tools can be returned for a full refund (minus freight), no questions asked. The price of the sale is for 5 endmills. Sign up for my email newsletters by adding my eBay Store to your Favorites SHIPPING: Save on shipping costs by combining the shipping charges for multiple purchases of other store items. If the shipping charges don’t look right, don’t pay but instead send me an email so I can send a corrected invoice. US FLAT RATE SHIPPING OPTIONS: $4.50 1st class mail $9.00 priority mail – includes 50 pack storage box INTERNATIONAL SHIPPING OPTIONS: INTERNATIONAL SHIPPING CHARGES ARE CALCULATED delivery time varies by country – 1st class mail (may take up to 8 weeks for delivery) – priority mail small flat rate box (up to 8 weeks) – priority mail standard – includes tracking number – express mail – includes tracking number Please email with questions, and feel free to check out my other listings and auctions. Check out my other items! Be sure to add me to your favorites list!
(5)1.60mm (.0630″) DIAMOND-CUT CARBIDE ROUTER BURRS FT KYOCERA 4100Q0630.394A3
100% of orders shipped on time and same day if received by 3:00pm CST. We ship every weekday and most Saturdays. Use the shopping cart feature to combine all your items into one order, with one shipping charge. Don’t be alarmed if Ebay shows a high shipping cost per piece. Ebay will discount the shipping to a flat rate (for domestic orders) at checkout. Let me know if there are questions on shipping. For sale are (5) new carbide diamond-cut router burrs made by Kyocera Tycom. They are 1.60mm (.0630”) in diameter and have a fishtail endstyle. They are 1.5” long, and flute length of (.394”). These burrs are built for extended tool life in routing composite materials such as FR4 and some plastics. A collet locating ring is installed on each router burr. Part number: 4100Q0630.394A3 Cutting Diameter Flute Style Flute Length Shank Size Overall Length Endstyle .0630″ Diamond-cut .394” .125” 1.5 in. fishtail The “rules of the tools” apply. What this means is that all unused tools can be returned for a full refund (minus freight), no questions asked. The price of the sale is for 5 router burrs. SHIPPING: Save on shipping costs by combining the shipping charges for multiple purchases of other store items. If the shipping charges don’t look right, don’t pay but instead send me an email so I can send a corrected invoice. US FLAT RATE SHIPPING OPTIONS: $4.50 1st class mail $9.00 priority mail – includes 50 pack storage box INTERNATIONAL SHIPPING OPTIONS: INTERNATIONAL SHIPPING CHARGES ARE CALCULATED – 1st class mail – priority mail small flat rate box ABOVE OPTIONS- UP TO 10 WEEKS FOR DELIVERY – priority mail standard – includes tracking number – express mail – includes tracking number Please email with questions, and feel free to check out my other listings and auctions. Check out my other items! Be sure to add me to your favorites list!
(5) 1.60mm (.0630″) 2 FLUTE CARBIDE ENDMILL STUB BALL ALTIN COATED 1635-0630L095
100% of orders shipped on time and same day if received by 3:00pm CST. We ship every weekday and most Saturdays. Use the shopping cart feature to combine all your items into one order, with one shipping charge. Don’t be alarmed if Ebay shows a high shipping cost per piece. Ebay will discount the shipping to a flat rate (for domestic orders) at checkout. Let me know if there are questions on shipping. MADE IN USA – TEMPORARY SALE ON THIS ITEM For sale are (5) 1.60mm (.0630″) new two-flute, solid carbide endmills. These endmills are made by Kyocera Microtools. They are short flute (stub) and have a ball end endstyle. They are AlTiN coated to add tool life. part number: 1635-0630L095 diameter size # flutes length of cut shank OAL end-style .0630″ 1.60mm 2 .095″ .118” 1.5” ball end Brand: KyoceraPart Number: 1635-0630L095Item Type: 2 Flute Stub Length Ball Nose End MillSeries: Series 1635Coating: AlTiN CoatedFlutes: 2 FluteDiameter: 1.60mmShank: 3mmLength of Cut (LOC): 2.40mmOverall Length (OAL): 38mmReach Length: N/ARadius: N/APoint Angle: N/APrimary Applications: Steel ~30HRC, Steel 30~40HRC, Hardened Steel ~55HRCAdditional Applications: Hardened Steel ~68HRC, Stainless Steel, Cast Iron, Nickel & Cobalt, Titanium AlloyKyocera Microtool products are manufactured with the finest carbide grades available. As a result, Kyocera Microtools applies the latest developments in material science to the design and manufacture of precision cutting tools. You’ll not find a better endmill at this price. The “rules of the tools” apply. What this means is that all unused tools can be returned for a full refund (minus freight), no questions asked. The price of the sale is 5 endmills. SHIPPING: Save on shipping costs by combining the shipping charges for multiple purchases of other store items. If the shipping charges don’t look right, don’t pay but instead send me an email so I can send a corrected invoice. US FLAT RATE SHIPPING OPTIONS: $4.50 1st class mail $9.00 priority mail INTERNATIONAL SHIPPING OPTIONS: INTERNATIONAL SHIPPING CHARGES ARE CALCULATED delivery time varies by destination – 1st class mail – priority mail small flat rate box – priority mail standard – includes tracking number – express mail – includes tracking number Please email with questions, and feel free to check out my other listings and auctions. Check out my other items! Be sure to add me to your favorites list!
1.60mm (.0630″) CARBIDE BALL END MILL 2 FLUTE 6mm SHANK KYOCERA 1625-0630J063S
100% of orders shipped on time and same day if received by 3:00pm CST. We ship every weekday and most Saturdays. Use the shopping cart feature to combine all your items into one order, with one shipping charge. Don’t be alarmed if Ebay shows a high shipping cost per piece. Ebay will discount the shipping to a flat rate (for domestic orders) at checkout. Let me know if there are questions on shipping. MADE IN USA For sale are 1.60mm (.0630″) new two-flute, solid carbide endmills. These are stub flute length and have a ball end endstyle. They are coated. Use these for all you milling applications, including hard metal milling. part number: 1625-0630J063S Brand NameKyoceraCutting Angle20 degreesCutting Diameter1.60 millimetersCutting Length1.60 millimetersEnd Cut TypeSingle EndFinish TypeKTX-IFor use with what product?High-performance millingHand OrientationRightItem Diameter1.60 millimetersLength45 millimetersManufacturer Series Number16 HMSMaterialCarbideMeasurement SystemMetricModel Number1625-0630J063SNumber Of Flutes2Number of Items1Part Number1625-0630J063SShank Diameter6 millimetersUNSPSC Code27112803 Kyocera Microtool products are manufactured with the finest carbide grades available. As a result, Kyocera Microtools applies the latest developments in material science to the design and manufacture of precision cutting tools. You’ll not find a better endmill at this price. The “rules of the tools” apply. What this means is that all unused tools can be returned for a full refund (minus freight), no questions asked. The price of the sale is each individual endmill. Check out my other items! Sign up for my email newsletters by adding my eBay Store to your Favorites SHIPPING: Save on shipping costs by combining the shipping charges for multiple purchases of other store items. If the shipping charges don’t look right, don’t pay but instead send me an email so I can send a corrected invoice. US FLAT RATE SHIPPING OPTIONS: $4.50 1st class mail $9.00 priority mail INTERNATIONAL SHIPPING OPTIONS: INTERNATIONAL SHIPPING CHARGES ARE CALCULATED delivery time varies by country – 1st class mail – priority mail small flat rate box – priority mail standard – includes tracking number – express mail – includes tracking number Please email with questions, and feel free to check out my other listings and auctions. Check out my other items! Be sure to add me to your favorites list!
(5) – 1.60mm (.0630″) Carbide End Mills, 2 Flute Kyocera 1600-0630.250A2
You’ll not find a better endmill at this price. These endmills are made by Kyocera Tycom. These tools are normally sold into the printed circuit board market. part number: 1600.0630.250A2. length of cut.