Car wash lift logo

CAR WASH SERVICE LIFT LAHORE

by Unknown author

Steam Gauge Siphon 1/4″ NPT SCH 40 Steel 500 PSI 400° F Pigtail See pictures

This Steam Gauge Siphon is a reliable tool for measuring pressure and temperature in your system. Made of high-quality materials, it is durable and built to last. With a 1/4″ NPT SCH 40 Steel 500 PSI 400° F Pigtail design, it is easy to install and use. The gauge purpose is for pressure and it is suitable for use in various industries. The model is SCHEDULE 40 STEEL 500 PSI 400 DEGREE F and it is manufactured in Taiwan. The vacuum units are in PSI and it has a length of 5.75″. This item is perfect for those in the HVAC & Refrigeration industry and it is a great addition to your toolkit.

by Unknown author

Steam Gauge Siphon Pigtail 1/4″ NPT SCH 40 316 Stainless 500 PSI 400° F 735ER23

MAINLAND VALVE & FITTING, INC. INDUSTRIAL WHOLESALE SUPPLY MAINLAND VALVE & FITTING IS AN INDUSTRIAL WHOLESALE COMPANY THAT BUYS AND SALES INDUSTRIAL SURPLUS. MOST MATERIAL OFFERED BY US WILL BE OF AN INDUSTRIAL GRADE. WHAT THAT MEANS FOR YOU IS, YOU WILL RECEIVE A HIGH QUALITY LONG LASTING PRODUCT AT A SUBSTANTIAL SAVINGS. Be sure to add me to your favorites list! STEAM GAUGE SIPHON / PIGTAIL Lot Description: YOU ARE LOOKING AT ONE(1) STEAM GAUGE SIPHON STEAM GAUGE SIPHON / PIGTAILFOR VERTICAL USEPART NUMBER: 42017611/4″ NPTSCHEDULE 40 316 STAINLESS STEELPRESSURE RATING: 5000 PSITEMPERATURE: 400* F (These products are represented as FACTORY NEW)IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT US. Be sure to add me to your favorites list! Bid High & Bid Often THANK YOU, COME AGAIN Please note: In some cases we will use the same picture for multiple listings of the exact same item. Please keep in mind that you will receive the same product of the same or better quality as pictured. Our office hours are M-F, 8-5 cst. We will respond to any questions you have on the following business day. INVESTMENT RECOVERY *WE BUY INDUSTRIAL SURPLUS* Terms & Conditions: Mainland Valve & Fitting, Inc. is a wholesaler of surplus industrial equipment. All products represented by Mainland Valve & Fitting, Inc. that are noted as surplus are surplus and are not represented by any manufacture. No manufacture warranty or any warranty is expressed or implied. All products represented by Mainland Valve & Fitting, Inc. that are noted as factory new are factory new and are warranted only by the manufactures warranty. No other warranty is expressed or implied. All Names, Logos, Description & other related information are trademarks of their respected companies. All information listed herein is, to the best of our knowledge, believed to be correct. All material is surplus, and we have no way of testing anything we sell. please review the pictures carefully. All material noted as new surplus are unused and in as new condition, all material noted as used are used and in a usable or repairable condition. If you have any questions, contact us. Shipping cost will be actual cost only plus a small handling fee to help cover shipping supplies and seller cost($2.00 min. unless special request are made). We will combine multiple auctions into one shipments, you pay only one handling fee per shipment, even on combined shipments. Questions, comments, or concerns please contact customer service.

by Unknown author

1ft to 70ft Galvanized Steel Wire Rope Vinyl Coated 3/16� 7×19 Strands 1/8� Core

Wire rope;also called wire cable;is an assembly of wire strands formed hectically around a center core. The construction includes 7 strands and 19 wires per strand in galvanized steel resulting in a small diameter that is both flexible and offers resistance to corrosion. Note: Breaking strength ratings are listed for comparison purposes only. Actual operating loads may vary;but should never exceed the recommended design factor or 1/7 of catalog breaking strength. These cables are not designed for overhead lifting or aircraft use.GALVANIZED STEEL CABLE OPTIONSBoth Ends of the Cable Wire are Looped and Crimped with Stainless Steel SleeveOne End of the Cable Wire are Looped and Crimped with Stainless Steel SleeveOption for Cable OnlyCustom Cut to Order 1 foot – 70 feetCABLE SPECIFICATION1/8″ Core Diameter 3/16″ Clear Vinyl Coated Overall DiameterGalvanized SteelPVC ClearCable Breaking Strength: 2000lbsLoop breaking strength: N/A•••DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED••• Do not use breaking strength for design or rating purposes. Use working load limit instead. PHAT SATELLITE INTL assumes no responsibility for the use;misuse;or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use. PLEASE SEE ALL CABLES WITH VARIOUS SPECIFICATIONS by PHAT SATELLITE INTL SEARCH ON EBAY FOR PHAT SATELLITE INTL IMPORTANT INFORMATIONLegal Disclaimer: Weights and figures are for reference only. Consultation of an independent engineer or other qualified persons for your usage is highly recommended. Breaking strength provided for wire rope are approximate only. Information on wire rope should only be used as a guide; information may vary according to manufacturing specifications;and usage applications. Check tensile strength (Grade) and MBS (Minimum Breaking Strain) at time of order and receiving of the order to confirm appropriateness of information;and before product usage or application. Additional sizes of wire rope of commercial rigging fittings and sleeves are not rated and must not be used for any tensioning;suspension;load-bearing/lifting applications;or other purposes subject to control by statutory requirements. Rigging screws are batch tested only. Lifting applications require an individual certificate of proof test to be supplied by qualified professional and or organization for your specific usage applications. Hardware chain and braided cables of commercial quality is suitable for general use only. Not suitable for lifting;suspension;under load;or any application subject to control by statutory authorities/requirements.

by Unknown author

1/4″ COATED GALVANIZED STEEL CABLE ALUMINUM SLEEVE, 1-75ft Clear, Yellow, White

CABLE SPECIFICATION1-75 feet, Vinyl Coated Galvanized Steel Cable WireJacket Color: Clear, Yellow, WhiteOuter Diameter: 1/4 inches with coatingCore Diameter: 3/16 inches galvanized steelMaximum Tensile Strength: 3700 lbsRefers to federal RR-W-410H specificationCable End Configuration: Looped on both ends with aluminum sleeve *** Length indicated on this listing is measured from the end of the loop(s) *** IMPORTANT INFORMATION Maximum Tensile Strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should never exceed recommended design factor or 12% of maximum tensile strength. These cables are not designed for overhead lifting or aircraft use; never exceed working load limit. maximum tensile strength is not considered safe working load limit. PHAT SATELLITE INTL assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use. We recommend buyer to consult with a licensed engineer for proper usage safety. ***DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED*** Working Load Limit (WLL) – The Working Load Limit is the maximum load which should ever be applied to the cable, even when new or when the load is evenly distributed – straight line pull only. Avoid side loading. All ratings are based upon regular environmental conditions; conditions; attention must be given to unusual conditions such as severe temperature, chemical solutions or vapors, prolonged immersion in salt water, etc. Proof Test Load (Proof Load) – The term “Proof Test” assigns a quality control test applied to the product for exclusive function of exposing flaws in material or build. The Proof Test Load (normally 2x the WLL) is load which the cable underwent & sustained without malformation when new and under laboratory test conditions. The Proof Test Load does not mean that the WLL should ever be exceeded.Breaking Strength – Breaking Strength is the average force at which the wire rope, in the condition it would leave the factory, has been found by representative testing to break, when a constantly increasing force is applied in direct line to the product at a uniform rate of speed on a stander pull testing machine. Proof testing to twice the WLL does not apply to hand-spiced slings. Remember: Breaking Strength, when published, where obtained under controlled laboratory conditions. Listing the Breaking Strength does not mean the Working Load Limit should ever be exceeded. Do not use breaking strength as a criterion for ser vice or design purposes. Refer to the Working Load Limit instead.Design Factor – An industry term usually computed by dividing the Breaking Strength by the WLL and generally expressed as a ration (ex: 7:1).Shock Load – A load resulting from rapid change of movement, such as impacting, jerking or swinging of a stack load. Sudden release of tension is another form of shock loading. Shock loads are generally significantly greater than static loads. Any shock loading must be considered when selecting the item for use in a system. Avoid shock loads as they may exceed the Working Load Limit.

by Unknown author

3/16″ COATED PVC GALVANIZED STEEL CABLE METAL WIRE ROPE 1ft-75ft (Clear, Yellow)

CABLE SPECIFICATION1-75 feet, Vinyl Coated Galvanized Steel Cable WireJacket Color: Clear, YellowOuter Diameter: 3/16 inches with coatingCore Diameter: 1/8 inches galvanized steelMaximum Tensile Strength: 1700 lbsRefers to federal RR-W-410H specificationCable End Configuration: Looped on both ends with aluminum sleeve*** Length indicated on this listing is measured from the end of the loop(s) ***IMPORTANT INFORMATIONMaximum Tensile Strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should never exceed recommended design factor or 12% of maximum tensile strength. These cables are not designed for overhead lifting or aircraft use; never exceed working load limit. maximum tensile strength is not considered safe working load limit. PHAT SATELLITE INTL assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use. We recommend buyer to consult with a licensed engineer for proper usage safety.***DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED***Working Load Limit (WLL) – The Working Load Limit is the maximum load which should ever be applied to the cable, even when new or when the load is evenly distributed – straight line pull only. Avoid side loading. All ratings are based upon regular environmental conditions; conditions; attention must be given to unusual conditions such as severe temperature, chemical solutions or vapors, prolonged immersion in salt water, etc. Proof Test Load (Proof Load) – The term “Proof Test” assigns a quality control test applied to the product for exclusive function of exposing flaws in material or build. The Proof Test Load (normally 2x the WLL) is load which the cable underwent & sustained without malformation when new and under laboratory test conditions. The Proof Test Load does not mean that the WLL should ever be exceeded.Breaking Strength – Breaking Strength is the average force at which the wire rope, in the condition it would leave the factory, has been found by representative testing to break, when a constantly increasing force is applied in direct line to the product at a uniform rate of speed on a stander pull testing machine. Proof testing to twice the WLL does not apply to hand-spiced slings. Remember: Breaking Strength, when published, where obtained under controlled laboratory conditions. Listing the Breaking Strength does not mean the Working Load Limit should ever be exceeded. Do not use breaking strength as a criterion for ser vice or design purposes. Refer to the Working Load Limit instead.Design Factor – An industry term usually computed by dividing the Breaking Strength by the WLL and generally expressed as a ration (ex: 7:1).Shock Load – A load resulting from rapid change of movement, such as impacting, jerking or swinging of a stack load. Sudden release of tension is another form of shock loading. Shock loads are generally significantly greater than static loads. Any shock loading must be considered when selecting the item for use in a system. Avoid shock loads as they may exceed the Working Load Limit.

by Unknown author

1ft – 70ft Galvanized Steel 3/16″ – 1/4″ Vinyl Coat Wire Rope Cable 7×19 strand

Wire rope, also called wire cable, is an assembly of wire strands formed hectically around a center core. The construction includes 7 strands and 19 wires per strand in galvanized steel resulting in a small diameter that is both flexible and offers resistance to corrosion. Note: Breaking strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should never exceed the recommended design factor or 1/7 of catalog breaking strength. These cables are not designed for overhead lifting or aircraft use.GALVANIZED STEEL CABLE OPTIONSBoth Ends of the Cable Wire are Looped and Crimped with Aluminum SleeveOne End of the Cable Wire are Looped and Crimped with Aluminum SleeveOption for Cable OnlyCustom Cut to Order 1 foot – 70 feetCABLE SPECIFICATION3/16″ Center Core Diameter Coated to 1/4″ Overall DiameterGalvanized SteelPVC ClearCable Breaking Strength: 4200lbsLoop breaking strength: N/A•••DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED••• Do not use breaking strength for design or rating purposes. Use working load limit instead. PHAT SATELLITE INTL assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use. PLEASE SEE ALL CABLES WITH VARIOUS SPECIFICATIONS by PHAT SATELLITE INTL SEARCH ON EBAY FOR PHAT SATELLITE INTL IMPORTANT INFORMATIONLegal Disclaimer: Weights and figures are for reference only. Consultation of an independent engineer or other qualified persons for your usage is highly recommended. Breaking strength provided for wire rope are approximate only. Information on wire rope should only be used as a guide; information may vary according to manufacturing specifications, and usage applications. Check tensile strength (Grade) and MBS (Minimum Breaking Strain) at time of order and receiving of the order to confirm appropriateness of information, and before product usage or application. Additional sizes of wire rope of commercial rigging fittings and sleeves are not rated and must not be used for any tensioning, suspension, load-bearing/lifting applications, or other purposes subject to control by statutory requirements. Rigging screws are batch tested only. Lifting applications require an individual certificate of proof test to be supplied by qualified professional and or organization for your specific usage applications. Hardware chain and braided cables of commercial quality is suitable for general use only. Not suitable for lifting, suspension, under load, or any application subject to control by statutory authorities/requirements.

Type to search